DRAGRCR RED EYES

[vortecd]

I like these........
View attachment 16930

Mine are black but I have the same setup for the track.

 

[DRAGRCR]

X

 

[HRJ]

I just tucked the seat wiring harnesses with the Airbag Harness that I made plugged in under the carpet and taped over the holes with black tape.I don't think it looks that bad.
View attachment 16947

I guess it just surprised me. I've seen you go to great lengths with previous cars on a small detail. Didn't figure unbolting a console was that much of an obstacle lol

 

[hell on wheels]

I like these........
View attachment 16930

This car should fit the trailer
Better between the wheel wells
With this set up.

 

[DRAGRCR]

X

 

[DRAGRCR]

X

 

[hell on wheels]

Dam. That's close

I'm glad I went with 5200lb

Axles.

I like my 18" 305s.

I have about 2" per side in the rear.

Sometimes I load it not perfect I just leave it.

 

[hell on wheels]

Before I built the trailer @ 24 ft.

I used some sticks to layout

The dimensions full scale.

To make sure everything was gonna fit.

 

[hell on wheels]

I also made sure that the vent and batt. box

Were in reach while the trailer was loaded.

I know I would forget the vent everytime.

Before I load the car.

 

[DRAGRCR]

X

 

[Octanewide]

Removed the driver side hood scoop incert😊

 

[DRAGRCR]

X

 

[Octanewide]

PM your address if you like..............
View attachment 16981

Done..thanks

Sent from my SM-G950U using Tapatalk

 

[hell on wheels]

You installed the passenger mirror delete.

 

[jgilj]

WINNER ! I guess I should have made this harder

PM your address if you like..............
View attachment 16981

Ron do you think removing that grill will help ?

 

[DRAGRCR]

X

 

[DRAGRCR]

X

 

[Frenchcat]

Correct, on my 2019, there is no grills in those snorkel bezel!

 

[Frenchcat]

Dragrcr, have you checked the size of the hole in the baffle in the duct between the passager snokel and the driver side?
On the RE 2019, it is about the size of a dime.

 

[DRAGRCR]

X