What did you do to your Hellcat today?

[DGatzby]

Missed it again. Showed people pictures and video of it.

 

[REVN302]

Today I tested out my dragy with my current tire and wheel setup (Goodyear All Season 275/40/20r). I ended up getting a 13.5s 1/4 because the hard all seasons didn’t have any grip. I used setting 2 on RaceTCS and ran again, this time getting a 12.3 second 1/4 mile. It’s obvious the RaceTCS helped me maintain traction. I ordered new summer tires for the rear to see wha times I can get.
***the slower run was invalid because of the slope. I was impressed how the slower time had the slope advantage, yet was still much slower. More testing!!!

 

[2ndAmend]

Today I tested out my dragy with my current tire and wheel setup (Goodyear All Season 275/40/20r). I ended up getting a 13.5s 1/4 because the hard all seasons didn’t have any grip. I used setting 2 on RaceTCS and ran again, this time getting a 12.3 second 1/4 mile. It’s obvious the RaceTCS helped me maintain traction. I ordered new summer tires for the rear to see wha times I can get.
***the slower run was invalid because of the slope. I was impressed how the slower time had the slope advantage, yet was still much slower. More testing!!!

Last season at the dragway a young guy with a std HCNB A8 with AS's did 11.8!!! He said he started in 2nd, I have no idea how to do that. Also, it was an older one, they are faster.

 

[Jimmy N.]

From what I can tell EricG didn't do anything to his 'Cat today...but he's lusting for a V8 Pacer.

 

[1971demon]

Guys are missing the obvious solution. Move to where it doesn’t get cold. Simple

Make up yer mind...tellin us all to move where it's not cold....then yer bitchin about 80 and sunny...what's up with that..

 

[Wizza]

Unboxed my newest part.....did not disappoint either

Blackbird Performance valve covers in black with logo were available and shipped to me in 3 days

Already put their tensioner on and it looks fantastic against the Litens bracket

Just a matter of time before it gets changed over. Made the firm choice to go ahead and have my AFR heads installed in July, that with the valve covers, new pushrods will be enough for me I think

82,000 plus miles at this point and still enjoying it

 

[1971demon]

Unboxed my newest part.....did not disappoint either

Blackbird Performance valve covers in black with logo were available and shipped to me in 3 days

Already put their tensioner on and it looks fantastic against the Litens bracket

Just a matter of time before it gets changed over. Made the firm choice to go ahead and have my AFR heads installed in July, that with the valve covers, new pushrods will be enough for me I think

82,000 plus miles at this point and still enjoying it

Wow...82.000...guess ya bought it to drive it

 

[REVN302]

Unboxed my newest part.....did not disappoint either

Blackbird Performance valve covers in black with logo were available and shipped to me in 3 days

Already put their tensioner on and it looks fantastic against the Litens bracket

Just a matter of time before it gets changed over. Made the firm choice to go ahead and have my AFR heads installed in July, that with the valve covers, new pushrods will be enough for me I think

82,000 plus miles at this point and still enjoying it

I have 92xxx miles and drive it every day! How are those AFR heads?? Flow much better than stock??

 

[Wizza]

I have 92xxx miles and drive it every day! How are those AFR heads?? Flow much better than stock??

all indications point that way, have a desire to add some additional stronger parts into the car immediately after I window the block....

the conversation will go like this....."but honey it is not supposed to make that noise so I need a new air cleaner"......insert new block, cam and internals

I had genuinely planned to get a new long block and transmission setup I put these on, but plans change as we all know.......obviously no one wanted to save money and wait time on getting them right away when I listed them for sale, and they do me zero benefit on the shelf

 

[2ndAmend]

82,000 plus miles at this point and still enjoying it

So, I have to know, and I HOPE this doesn't turn into another thread hijack, do you let your car warm up a bit on cold mornings, or do you start and drive off? I'm asking for a friend. (Be cool Jimmy! )

 

[Jimmy N.]

I thought you knew, 2ndAmend.

Half of those miles are achieved by idling the car in gear on jack stands.

 

[1971demon]

I thought you knew, 2ndAmend.

Half of those miles are achieved by idling the car in gear on jack stands.

But Jimmie...doesn't it have to be in gear

 

[Jimmy N.]

It does. Otherwise the jack stands would be unnecessary.

 

[1971demon]

It does. Otherwise the jack stands would be unnecessary.

WTF...no wonder Holy Guy pushed the ignore button on me,,

 

[Wizza]

So, I have to know, and I HOPE this doesn't turn into another thread hijack, do you let your car warm up a bit on cold mornings, or do you start and drive off? I'm asking for a friend. (Be cool Jimmy! )

yes.......I do

 

[EricG]

From what I can tell EricG didn't do anything to his 'Cat today...but he's lusting for a V8 Pacer.

Hey - that Pacer was cool as hell! Got bid up to $3100!!!

Sorry I missed your call, was at wrestling tournaments both days this weekend

 

[jonx96]

Mine car is getting the newly designed Johnson’s. Dropped it out today

 

[Octanewide]

Unboxed my newest part.....did not disappoint either

Blackbird Performance valve covers in black with logo were available and shipped to me in 3 days

Already put their tensioner on and it looks fantastic against the Litens bracket

Just a matter of time before it gets changed over. Made the firm choice to go ahead and have my AFR heads installed in July, that with the valve covers, new pushrods will be enough for me I think

82,000 plus miles at this point and still enjoying it

@Wizza How do you like that thermo clocker?

Sent from my SM-G781V using Tapatalk

 

[Unholy707]

Mine car is getting the newly designed Johnson’s. Dropped it out today
View attachment 158612

View attachment 158613 View attachment 158614

I like that stand, did you buy it or someone you know fab it up?

 

[jonx96]

I like that stand, did you buy it or someone you know fab it up?

A friend made it