What did you do to your Hellcat today?

[hellno]

talked to curt at dusteroff tuning and sent payment for tuning ,then jba cat deletes came in ,put it on the rack and proceeded to install them and the damn so called direct fit cat deletes didn't fit had to work a lot harder to get the darn pipes into the rear section (needless to say it kicked my ass) then all said and done the driver downstream o2 sensor bung was located so far down the pipe it was too short to be plugged back in ,, I had ordered the big daddies 02 simulators(even though with the tune I wont need them) and I was leaving the shop and they were in the mail box went back in raised the hellcat back up and added the simulators and now all is well in elvis land again

 

[Machran]

UPR fender mount catch can and hit the 500 mile mark today

 

[Hickster]

Got the Hemi plate painted, calipers ready for paint Monday, all brackets, containing boxes, hoses, intake, sanded ready for paint Monday. All emblems cleaned, removed, and ready for paint. New brake pads be here Monday so to clean wheel whales of brake dust, paint calipers and reinstall Monday. More sanding, scratch and sniff every thing else on Sunday for painters on Monday and Tuesday. Then I can change every thing again. Have 1 sand blaster, hand sander, and 2 painters working with a mechanic to put this back together this week. Depending,,, if I don't change a lot more stuff. Other than that,, nothing.

 

[hellno]

curt did some more adjustments on the hellcat today and the logs are looking really good!!

 

[Hellcatcfp]

Just hit 11,000 miles on way home tonight. Was stopped at a light and looked down. Been a great car so far.

 

[45-70govt]

I enjoyed perfect weather all day at work, thinking I would take the kitty out to dinner. Got home and it was raining. Kitty didn't come out today, but I drooled over her for as long as it took to kill 2 beers.

 

[RGPIII]

Got my front Demon wheels installed. I like them enough that I’ll buy the rears 20x11 and put drag radials on them for the street and not run my 17’s all the time once I get here dialed in.

 

[HarleyHetz]

talked to curt at dusteroff tuning and sent payment for tuning ,then jba cat deletes came in ,put it on the rack and proceeded to install them and the damn so called direct fit cat deletes didn't fit had to work a lot harder to get the darn pipes into the rear section (needless to say it kicked my ass) then all said and done the driver downstream o2 sensor bung was located so far down the pipe it was too short to be plugged back in ,, I had ordered the big daddies 02 simulators(even though with the tune I wont need them) and I was leaving the shop and they were in the mail box went back in raised the hellcat back up and added the simulators and now all is well in elvis land again

A fellow Memphian! What part of the city are you in? I'm in Bartlett.

 

[hellno]

A fellow Memphian! What part of the city are you in? I'm in Bartlett.

my shop is off Bartlett rd down the street from putt putt golf and games but I live in Atoka,

 

[HarleyHetz]

my shop is off Bartlett rd down the street from putt putt golf and games but I live in Atoka,

Will have to stop in and visit one of these days...

 

[hellno]

Will have to stop in and visit one of these days...

come by anytime 1696 Bartlett rd 38134

 

[TEXAS REDEYE]

Got my baby girl home today. 2019 Red Eye. Through tune, 2.85 upper, catless midpipe, 180 thermostat, and HP tuners engine and transmission tune ...picked up 98 rwhp from 616 to 714 on a Mustang dyno On a Dynojet this would relate to around 800 rwhp. I thought we would have time to do driveshaft loop and a differential brace, but it would've taken a couple more days, which I didn't have. We will have a track rental at Houston Raceway on 9/25/19 to break the car in and then there's Moparfest on 10/5/19 at Houston Raceway.

 

[Hunter]

I enjoyed perfect weather all day at work, thinking I would take the kitty out to dinner. Got home and it was raining. Kitty didn't come out today, but I drooled over her for as long as it took to kill 2 beers.

Cannot argue with ice cold beer though.

 

[Hunter]

Got my front Demon wheels installed. I like them enough that I’ll buy the rears 20x11 and put drag radials on them for the street and not run my 17’s all the time once I get here dialed in. View attachment 2119 View attachment 2120 View attachment 2121

Beautiful Challenger!

 

[hellno]

Got my baby girl home today. 2019 Red Eye. Through tune, 2.85 upper, catless midpipe, 180 thermostat, and HP tuners engine and transmission tune ...picked up 98 rwhp from 616 to 714 on a Mustang dyno On a Dynojet this would relate to around 800 rwhp. I thought we would have time to do driveshaft loop and a differential brace, but it would've taken a couple more days, which I didn't have. We will have a track rental at Houston Raceway on 9/25/19 to break the car in and then there's Moparfest on 10/5/19 at Houston Raceway.

MY BUTT DYNO COULDNT TELL HORSPOWER NUMBERS LOL

 

[DGatzby]

Damn looked at it again all covered up! Had to leave in an emergency Saturday, covered it clean, another member and I were going to go over the the Autoplex for their Open House and meet each other this evening. It's flipping raining, and raining and flipping raining again! Folks we know over in Sioux Falls are all okay, but they are in worse shape after 3 big ones whipped up over their city last night. Talked to a guy today he said our building is okay, but we lost a tree and lots of debris is around. Then he added, "but I don't think the architect wanted me to be able to see through the office building about 200' away from our building!"

 

[RGPIII]

It’s been a big week. I now have a PCM and trinity 2 on the way. Now just to figure out all I can do with it!

 

[YMMV]

Installed blend mount w/ R7 and my Pro Clip mount for the old brick.

 

[Hunter]

Direct response to thread question.
Drove it.
Smiled...

 

[Hellcatcfp]

Arrived 20 minutes early for an appointment...killing time at a local park.