NMCA Michigan 131 July 20-23

[Hatermkr]

nmca what ????

 

[vortecd]

View attachment 110723
nmca what ????

get that bitch back in there

 

[vortecd]

So my dad is going to drive the Challenger in the hemi shootout. Putting the hellcat wheels on it with the nittos to try to win $1000 in the 14 second class. I think it will go low 13's but not 13.00 so thinking on leaving in 2nd and may have to lift to try to get 14.00

 

[Hatermkr]

get that bitch back in there

It’s broke

 

[vortecd]

It’s broke

part dave sent not work

 

[Hatermkr]

part dave sent not work

More wrong than that pulling Steve’s trans tomorrow and putting in my car

 

[fumanchu182]

Y'all have a good time...

See y'all ass clowns in August at Milan.

 

[vortecd]

Getting ready to head out

 

[jgilj]

Don’t forget to keep us southern folks updated! Jon keep the front tires on the ground. Jim show them how it’s done.

 

[vortecd]

Just a couple time runs today

 

[vortecd]

My car rarely spins but did on 1st pass. Jon went a 9.20 still fight tb issues he is Changing it out

 

[DavidKFla]

Have fun and be safe.

 

[vortecd]

Finally ran at almost 7pm. I eased into it just to make sure it hooked and had a 1.49 60ft ran 9.55@146 in 2400 da. Car weight was 4675

 

[DavidKFla]

Finally ran at almost 7pm. I eased into it just to make sure it hooked and had a 1.49 60ft ran 9.55@146 in 2400 da. Car weight was 4675

I hate the long waits.

 

[vortecd]

My dad left in 2nd gear with the Challenger and ran 14.18. I said on the next pass do the same but put it in "sport" he went 14.03. We will get another time trial today before making our 3 passes. Trying to win the 14 second class so right where he needs to be

 

[vortecd]

Jon is playing with the tune for today on a few things. Need to get the 1st shift higher then 5900 and adding timing from 17 degrees

 

[jgilj]

He’ll get it figured out , hopefully you all do well.

 

[jonx96]

Jon is playing with the tune for today on a few things. Need to get the 1st shift higher then 5900 and adding timing from 17 degrees

You know we could go 20+ and higher shifts in every gear

 

[jonx96]

Getting all the free Stuff

 

[DavidKFla]

Jon break an axle?

@vortecd with a 9.55.